APC Pure Sine Wave Inverter, Charger

APC Pure Sine Wave Inverter, Charger

APC series pure sine wave inverter charger is the latest model presented by Foxpower Technology Limited. Developed on the base of our previous PSW7 series, the APC charger has achieved significant improvements on battery charging, AC transfer, etc. By adopting DIP (dual in-line package) switch, the APC pure sine wave inverter provides more smart options for users to customize the performance of the device.

 

Features of APC Pure Sine Wave Inverter, Charger

1. High overload ability of our APC charger is up to 300% rated power (20 sec.)

2. APC pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W (3s sensing cycle)/3W (30s sensing cycle)*. It can extract max. power from various batteries with different protections, and low voltage trip can be selected (9.5V/10V or 10V/10.5V)

3. Uses PFC (power factor correction) for charger, which has less power consumption than conventional units.

4. It has 15s delay before transfer when AC resumes, and overload protection when our APC pure sine wave inverter equips with generator.

5. 10ms typical transfer time between battery and AC, which guarantees power continuity of APC charger. Uses selectable input AC voltage (184-253v or 154-253v) for different kinds of loads.

6. Our APC charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp**.

7. It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.

8. LCD status display, battery/AC priority switch, USB communication port re available for our APC pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shouting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.

Note: * For 1KW one. **For some models

 

Optional Function

- LCD Display

- Battery priority module

- 120Vac/230Vac double output type

- RS232 communication module

- USB communication module

 

Supplied Accessories

- User manual

- DC connection cover (black and red)

 

Optional Accessories

- DC Cable 8AWG

- Remote control panel

Approvals

 

Technical Parameters of APC Pure Sine Wave Inverter, Charger

Electrical Specifications
Inverter Output	Model	APC 1000W	APC 2000W	APC 3000W	APC 4000W	APC 5000W	APC 6000W
	Continuous Output Power	1000w	2000w	3000w	4000w	5000w	6000w
	Surge Rating (20s)	3000w	6000w	9000w	12000w	15000w	18000w
	Output waveform	Pure sine wave/same as input (bypass mode)
	Nominal Efficiency	>88% (peak)
	Line Mode Efficiency	>95%
	Power Factor	0.9-1.0
	Nominal output voltage rms	110v/120v/220v/230v/240vac
	Output voltage regulation	±10% rms
	Output Frequency	50Hz ±0.3Hz/60Hz ±0.3Hz
	Short Circuit protection	Yes (10s after fault)
	THD	<3%
DC Input	Nominal input voltage	12V		24V		48V
	Minimum start voltage	10v		20v		40v
	Low battery alarm	10.5v		21v		42v
	Low battery trip	10v		20v		40v
	High voltage alarm	16v		32v		64v
	Low battery voltage recover	13v		26v		52v
	Idle consumption-search mode	<25w when power saver on
Charge	Input voltage range	95-127VAC		194-243VAC		164-243VAC (W)
	Output voltage	Depends on battery type
	Charger breaker rating	10A	10A	20A	20A	30A	30A
	Max. Charge Rate	35A / 70A
	Battery initial voltage for start up	0-15.7v for 12v (*2 for 24v, * 4 for 48v)
	Over charge protection shutdown	15.7v for 12v (*2 for 24v, *4 for 48v)
	Charger curve(4 stage constant current) battery types 4 step digital controlled progressive charge
	Battery type	Fast V Float V (*2 for 24v, *4 for 48v)
	Gel U.S.A	14			13.7
	A.G.M 1	14.1			13.4
	A.G.M 2	14.6			13.7
	Sealed Lead Acid	14.4			13.6
	Gel Euro	14.4			13.8
	Open Lead Acid	14.8			13.3
	Calcium	15.1			13.6
	De-sulphation	15.5 for 4hrs
	Remote Control	Yes. Optional
Bypass & Protection	Input voltage waveform	Sine wave (grid or generator)
	Nominal voltage	110VAC/120VAC			230VAC
	Low voltage trip	80v/90v±4%			184v/154v±4%
	Low voltage re-engage	90v/100v±4%			194v/164v±4%
	High voltage trip	140v±4%			253v±4%
	High voltage re-engage	135v±4%			243v±4%
	Max. Input AC Voltage	150VAC			270VAC
	Nominal input frequency	50Hz or 60Hz (auto detect)
	Low freq trip	47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
	Low freq re-engage	48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz
	High freq trip	55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
	High freq re-engage	54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz
	Overload protection (SMPS Load)	Circuit breaker
	Output short circuit protection	Circuit breaker
	Bypass breaker rating	10A	20A	30A	30A	40A	40A
	Transfer switch rating	30amp for UL & TUV			40amp for UL
	Bypass without battery connected	Yes
	Max. bypass current	30amp			40amp
	Bypass over load current	35amp: alarm			45amp: alarm
Mechanical Specifications
	Mounting	Wall mount
	Inverter dimensions (L*W*H)	382*218*179mm	442*218*179mm		598*218*179mm
	Inverter weight	18kg	20kg	24kg	35kg	45kg	45kg
	shipping dimensions (L*W*H)	520*315*300mm	580*315*300mm		740*315*300mm
	Shipping weight	20kg	22kg	26kg	37kg	47kg	47kg
	Display	Status LEDs/ status LEDs+LCD
	Standard Warranty	1 year